E-radionica.com Website Review

This site uses cookies. close more information ja*ascript seems to be disabled in your browser. You must have ja*ascript enabled in your browser to use the. the sensor of gestures, proximity and rgb colors apds-9960 breakout (made by e-radioni .. you are a beginner with a croduin. or with an electronics? for your eye stuck a certain module, but you do not know how to use it without worry, there is kkm! how to use modules (kkm) is a series of blog tutorials of an e-workshop where you will find everything you need to get started with your favorite module. The tutorials include: technical characteristics, working principle, instructions how to connect the module with the croduin and the base code. we will teach you how to cradle the data to the sd card using the sd card module. The sd card module allows us to merge the sd card up to 32gb per crop and we can store various data that matter to us and later process them on a computer or re-use on croduin. With this module we can also read the data from the sd card and prepare the sd card module to use the sd card on which the data is stored, but in order to work You need to format the card with fat16 or fat32 format with the card. for the micro sd card it is necessary to use the adapter, and if the card does not work with it, it is necessary to place the switch marked with the lock (shown in the picture) in the upper position so that they can work with the card (if you will not be able to format the card below). when you format the card to fat16 or fat32 format you are ready to work. the card does not need to have any file if we want to write to the card because it will be cu*bersome to create a file with the name that we provide to it in the code. pins from the module to the coredine pins used for sleep communication. pin cs can be connected to any pin of croduin only then in the code we have to change to which pin we connected. sd-module >>>>>>>>>> croduino mosi >>>>>>>>>>>>>>>> d11 miso >>>>>>>>>>>>>>>> d12 sck